hi, we just bought a yz250f 02, the bike has been stood for over 2 years, we have cleaned the carb and replaced the fuel/plug but are struggling to start the bike.
it has great compression and a strong spark, also it is getting fuel.. (we think, removed airfilter box, kicked the bike over and see puffs of fuel)
where not sure if we have the idle screw setup correct.. not sure where to begin, we have not tried to bump start the bike..
we begin kicking it, it will pop once with some smoke.. but will not pop again until its been stood for 3-5mins.
we followed the manual, kick it for 10-20 times with compression lever pulled in. then release and kick..
also pops when we kick it with compression pulled in..
we know to start with choke and no throttle...
it has great compression and a strong spark, also it is getting fuel.. (we think, removed airfilter box, kicked the bike over and see puffs of fuel)
where not sure if we have the idle screw setup correct.. not sure where to begin, we have not tried to bump start the bike..
we begin kicking it, it will pop once with some smoke.. but will not pop again until its been stood for 3-5mins.
we followed the manual, kick it for 10-20 times with compression lever pulled in. then release and kick..
also pops when we kick it with compression pulled in..
we know to start with choke and no throttle...